Online Monitoring Coal Moisture Analyzer

Online Cross-Belt Elemental Analyzer

Developed specifically for permanent material moisture measurements of solids in continuous processes. used for Online Moisture Measuring

In dusts, powders, granulates, wood chips and other bulk solids
In various installation positions
Simple installation in all processes and straightforward calibration are two important benefits of the daily process optimisation.
As the entire sensor is wear-resistant and watertight it is very reliable and will provide a long service life. As the material must always be in contact with the sensor, its measuring window is protected by a mixed ceramic screen which has a good load capacity in terms of wear and pressure.

With further development of the sensor, the new moisture measuring system sensor has been equipped with two additional features. It is possible to receive the material temperature continuously via a mA output. With the integrated temperature measurement the user receives another important process parameter in real time, which is particularly interesting for drying, heating or cooling processes.

Furthermore the sensor also offers the function of flow detection. The new flow detection feature extends process reliability, especially when used in applications with materials that tend to cake. The new function immediately detects whether the material in front of the sensor is in motion. Only when material is moving it is ensured that not the same material sample is permanently measured, resulting in a falsified measurement value.

In addition, issues an alarm as soon as no material flow occurs. For example, if there is no material flow through a Screw conveyor anymore, this won’t be seen by the process control system, but the nerates an alarm as soon as material is no longer conveyed.

Product Features

Strong environmental adaptability: Iron Slurry Analyzer can adapt to the harsh industrial site environment.

Highly corrosive environment: The probe is made of corrosion-resistant materials and can adapt to most corrosive environments such as strong alkalis.

There are no special requirements for the composition of the materials to be measured: it is not affected by bubbles; it is low affected by large particles; it is not affected by magnetic interference.

The detection range of particle size is wide: the maximum size range of 60 percentage points can be detected, and the minimum size range of 20 percentage points can be detected.

The size fraction span is large: The particle size analyzer measurement can be achieved in the diameter of the grain between 20μm to 1000μm.

Product Parameter

The maximum detectable flow channel number 1
The number of size fraction that can be detected at the same time in each channel ≤2
The grain diameter range that can be detected (μm) 20 ～ 1000
The nominal detectable particle size interval per size fraction (%)
Size fraction	Interval
μm：-75 ～ -850 mesh：200 ～ 20	20 ～ 80
μm：-45 ～ -75 mesh：325 ～ 200	30 ～ 70
μm：-25 ～ -45 mesh：500 ～ 325	70 ～ 95
Maximum nominal particle size span (percentage point) 30
the absolute error in the 1σ (%) 1 ~ 2
Analog output：4 ~ 20mA
Level of protection：detector：IP65；main control box：IP54
Ambient temperature：0 ~ +50℃
Medium environment：1 ~ 90℃
Medium pressure：86 ~ 106KPa
Power supply：220V AC，50Hz，50W

Product Application

It is mainly used to detect and analyze the particle size of the hard grain in the liquid and solid mixture slurry. PSI can be used in the grinding and dressing fields of black metal industry, basic metal industry, industrial mineral industry, and gold industry.

Contact us if you need more details on Split Online Moisture Coal Analyzer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Online Elemental Coal Analyzer、Online Coal Analyzer Analyzer. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Elemental Analyzer